Product parameter name: new torque tester brand: ELET Yilite Model: HP-2/HP-10/HP-20/HP-50/HP-100/HP-300 Remarks Product Description: digital torque tester is detected and precision instruments for test and calibration of torque. For measurement and calibration of various electrical torque approved, approved the wind torque batch, torque wrench and torque setting conditions. Applicable to the various need to measure the torque shaft, bearings, caps and other products, dedicated jigs, fixtures and other tools. Features: 1,??? Automatically shut down (to stand for 10 minutes automatically shut down (OFF)??? Can calculate the maximum, minimum and average value of the torque; 3??? Torque value display auto-zero; 4??? automatically remove the torque value function (switch can be adjusted automatically reset the time required) 5??? LCD digital display test values ??easy to interpret, not mistakes. 6??? can be set torque value. available buzzer prompts the operator. 7??? the setup tool torque peak retained until reset date, in order to maintain accurate 8??? clockwise counterclockwise direction, elastic torque can test 9 ??? inverse direction measurement data show negative 10 strain gauges directly attached to the torque sensor, the own shock device design is simple 11 can be connected to the control system and external data processing 12, the tester uses a rechargeable battery. small size, light weight, easy to carry using the 13 data output port, the measurement data transfer to the computer processing with an AC power adapter, suitable for 100-240 volt power supply. use nickel-metal hydride battery Product parameters: Model HP-2 HP-10 HP-20 HP-50 HP-100 HP-300 Nm 0.003-0.200 0.015-1.000 0.020-2.00 0.075-5.00 0.15-10.00 0.45-30.00 Lbf.in 0.03-1.8 0.15-9.0 0.20-peak range mode up to 18 0.75-45.0 1.5-90.0 4.5-270.0 Kgf.cm 0.03-2.00 0.15-10.00 0.20-20 0.75-50.0 1.5-100.0 4.5-300.0 accuracy of less than ± 0.5% full and the highest volume (mm) 123 x 230 x 65 Weight (kg) 1.8 Power 1.2V NiCd battery 5 1200mAh Charging time 6 hours 8 hours continuous use transformer input AC 120V or 220 ~ 240V, Output DC 7.25V 120mA optional online software: real-time torque data acquisition torque curve drawn test data can be exported to EXCEL spreadsheet for analysis. generate test reports